Hardware Pack
$12.49
Joseph M.
I had lost the screw that held the AIWB holster wing due to neglecting to put loctite. This kit has everything you need including that screw for the wing. Plus more.
DEMITRIUS O.
I like how many screws and washers come in the pack.
Allan S.
Just what I needed and right on time too
Kenneth N.
Lost a screw on a holster. This did the trick
Elliot H.
A couple of my screws and rivets rusted through my holster’s life. This pack for 12ish bucks was a lifesaver instead of going through the hassle of sourcing new parts on my own! And it was way cheaper than buying a brand new holster.
Anthony S.
There's enough extra parts to address any issues for years. I get a lot of use out of my holster. So far have only had to replace one screw.
Corey T.
Exactly what I needed, and comes with a lot of spare parts for future needs.
Ray S.
Called and talked to a customer service representative. He explained to me they have a kit for all their holster parts. Got her quickly and was what I needed to get my rig up and running again. Lots of parts, good kit to have just in case. Highly recommend
Rashad L.
Hardware pack came in clutch. It comes with additional claw adapters and I needed them since the initial somehow came undone. While this pack comes with everything you need, make sure you have loctite as well for additional security.
Thanks T1
Reno P.
Great package to ensure my holsters never go down. Had I known, I would have gotten this when I bought my first holster.
Ronald J.
I received my Tier1 holster and fell in love with it. I have ran classes with it and I have concealed carried for months. I tightened hardware when required. What I did not use was the supplied thread locker on all fasteners. As my luck ran out, I lost one of the backing nuts. Tier1 had this handy dandy kit for a reasonable price. It had everything I needed and more. Pick one up, eventually, you will need it.
Thomas S.
I add additional matched screw sets to your holsters after my ride height is confirmed (a third screw on each belt clip). I find the extra screw per clip is personally a bit more solid.
Ryan P.
I made the mistake of not snugging everything up and lost a screw, but I’m happy to have a full set replacements if I should ever need one again
justus d.
Great kit that will replace anything that may fall loose from your rig. Trust me something will back out or just ghost right TF off your set-up.
Steven H.
Fast shipping had everything I needed. Now I know to use the loctite thread locker.
Bobby C.
After quite some time of use and never checking the hardware, I lost the lower screw in the right clip. The set of hardware had everything. I would suggest you pick one up just in case. I don't like being without my concealed carry ever. And this holster makes it easy to carry full sized concealed. Not looking to replace the it. So this set was a no brainer.
Randy D.
I have been teaching concealed carry (and now Licence To Carry) in Texas since 1995. I've either worn IWB or OWB (covered with a shirt) in the 3:00 or 4:00o'clock position. That has played havoc on my ciatic nerve to the point that at times I could hardly walk.
I was NEVER a fan of appendics carry.
I was even reluctant to pay for what I thought was "too expensive" for a holser that might wind up in the drawer with all the others. But I gave in and bought the Tier One Axis Elite and gave it a try.
Now I wear it all day every day in the appendics position and very frequently forget I've even got it on.
Today I was in a gun store that I frequent and was showing it to the owner's son. I cleared the firearm (Glock 48 with Holosun red dot and XS Big Dot sights) and was showing him how fast I could draw it.
He was amazed and finally asked me how old I was. . .to which I replied "88". He was still astonished.
Any other holsters I ever buy WILL be Tier 1>
David L.
Delivered as ordered. I really like that I can order what I need and that it’s not a bag of fixed miscellaneous hardware. Received was exactly what was needed, and the hardware is solid. Thanks Tier 1!
Kathy
Everything I needed to customize my Tier 1 holster.
Richard H.
perfect hardware amount! Thanks.
Brian V.
Great value
Preston H.
Showed timely and had a little bit of every part i could need.
Rickey J.
Glad this hardware is available I need to check for lose hardware periodically
Amber R.
I owned my hostler for past 4 years and need parts. It worth it if you have spare parts, just in case.
Arthur’s W.
Always good to have spare parts.
Russell W.
This kit had all of the hardware I needed to get my holster back operational.
Nino G.
I am a big sig person and I have nothing but good things to say about the way take care of you. Pleasure to deal with and very helpful.
Nino
Anthony S.
The product was delivered on time. Thanks
Robert P.
Great product!
Daniel P.
Just exactly what you want. More than what you need. This is a very good bundle of screws, washers etc.
Ethan H.
Speedy Shipping!
Jareth R.
Exactly what it says it is. Also comes with the rubber washers even though it's not shown. Shipped fast, showed up in a few days.
Brandon F.
The extra hardware pack gives me the added option to set up my holster without the claw which depends on the type of belt I'm using that day. Since I've had my holster a while, it's also great to have extra rubber spacers ready to go when it's time to replace old ones.
Alex D.
Lost a screw. You sent screw. Problem fix. Thank.
Stephen W.
I lost a screw because I did not Loctite before use, I emailed customer service and didn’t hear anything back so I messaged on Instagram and they got right back to me about what I needed to order. Afrer ordering it actually shipped much quicker than I was expecting. The pack had screws of all sizes so now I’m ready if I lose anything else. Great deal!
Brent B.
Like several other customers who posted here I failed to follow the directions and did not loctite my hardware after I set up my AGIS holster. The hardware packet had everything I needed to replace the missing hardware.
john r.
works great, fits great
Cade Lappin
Great service
Lost a screw out of the Axis Slim I bought for my Glock 30. Tier 1 was fantastic to communicate with and got me the hardware kit fast. Always a pleasure doing business with them.
Jerry T Nunley
Exactly as stated
Of course I didn't put the loctite on my retention screws. Then boom my Beltclip swings upside down and screw is MIA. Ordered this and received earlier than expected and now good as new with extra parts!
Chris
Fantastic
Very good to have extra hardware to use in case you need, especially with the claw interaction. The hardware included does not include the leather or bungie cord used in the AGIS or AXIS holsters however.
Hardware Pack
This hardware pack includes four (4) of every piece of hardware that we use on our holsters.
Plus any hardware variations for the new EZ Adjust Clips and Concealment claw™
Joseph M.
I had lost the screw that held the AIWB holster wing due to neglecting to put loctite. This kit has everything you need including that screw for the wing. Plus more.
DEMITRIUS O.
I like how many screws and washers come in the pack.
Allan S.
Just what I needed and right on time too
Kenneth N.
Lost a screw on a holster. This did the trick
Elliot H.
A couple of my screws and rivets rusted through my holster’s life. This pack for 12ish bucks was a lifesaver instead of going through the hassle of sourcing new parts on my own! And it was way cheaper than buying a brand new holster.
Anthony S.
There's enough extra parts to address any issues for years. I get a lot of use out of my holster. So far have only had to replace one screw.
Corey T.
Exactly what I needed, and comes with a lot of spare parts for future needs.
Ray S.
Called and talked to a customer service representative. He explained to me they have a kit for all their holster parts. Got her quickly and was what I needed to get my rig up and running again. Lots of parts, good kit to have just in case. Highly recommend
Rashad L.
Hardware pack came in clutch. It comes with additional claw adapters and I needed them since the initial somehow came undone. While this pack comes with everything you need, make sure you have loctite as well for additional security.
Thanks T1
Reno P.
Great package to ensure my holsters never go down. Had I known, I would have gotten this when I bought my first holster.
Ronald J.
I received my Tier1 holster and fell in love with it. I have ran classes with it and I have concealed carried for months. I tightened hardware when required. What I did not use was the supplied thread locker on all fasteners. As my luck ran out, I lost one of the backing nuts. Tier1 had this handy dandy kit for a reasonable price. It had everything I needed and more. Pick one up, eventually, you will need it.
Thomas S.
I add additional matched screw sets to your holsters after my ride height is confirmed (a third screw on each belt clip). I find the extra screw per clip is personally a bit more solid.
Ryan P.
I made the mistake of not snugging everything up and lost a screw, but I’m happy to have a full set replacements if I should ever need one again
justus d.
Great kit that will replace anything that may fall loose from your rig. Trust me something will back out or just ghost right TF off your set-up.
Steven H.
Fast shipping had everything I needed. Now I know to use the loctite thread locker.
Bobby C.
After quite some time of use and never checking the hardware, I lost the lower screw in the right clip. The set of hardware had everything. I would suggest you pick one up just in case. I don't like being without my concealed carry ever. And this holster makes it easy to carry full sized concealed. Not looking to replace the it. So this set was a no brainer.
Randy D.
I have been teaching concealed carry (and now Licence To Carry) in Texas since 1995. I've either worn IWB or OWB (covered with a shirt) in the 3:00 or 4:00o'clock position. That has played havoc on my ciatic nerve to the point that at times I could hardly walk.
I was NEVER a fan of appendics carry.
I was even reluctant to pay for what I thought was "too expensive" for a holser that might wind up in the drawer with all the others. But I gave in and bought the Tier One Axis Elite and gave it a try.
Now I wear it all day every day in the appendics position and very frequently forget I've even got it on.
Today I was in a gun store that I frequent and was showing it to the owner's son. I cleared the firearm (Glock 48 with Holosun red dot and XS Big Dot sights) and was showing him how fast I could draw it.
He was amazed and finally asked me how old I was. . .to which I replied "88". He was still astonished.
Any other holsters I ever buy WILL be Tier 1>
David L.
Delivered as ordered. I really like that I can order what I need and that it’s not a bag of fixed miscellaneous hardware. Received was exactly what was needed, and the hardware is solid. Thanks Tier 1!
Kathy
Everything I needed to customize my Tier 1 holster.
Richard H.
perfect hardware amount! Thanks.
Brian V.
Great value
Preston H.
Showed timely and had a little bit of every part i could need.
Rickey J.
Glad this hardware is available I need to check for lose hardware periodically
Amber R.
I owned my hostler for past 4 years and need parts. It worth it if you have spare parts, just in case.
Arthur’s W.
Always good to have spare parts.
Russell W.
This kit had all of the hardware I needed to get my holster back operational.
Nino G.
I am a big sig person and I have nothing but good things to say about the way take care of you. Pleasure to deal with and very helpful.
Nino
Anthony S.
The product was delivered on time. Thanks
Robert P.
Great product!
Daniel P.
Just exactly what you want. More than what you need. This is a very good bundle of screws, washers etc.
Ethan H.
Speedy Shipping!
Jareth R.
Exactly what it says it is. Also comes with the rubber washers even though it's not shown. Shipped fast, showed up in a few days.
Brandon F.
The extra hardware pack gives me the added option to set up my holster without the claw which depends on the type of belt I'm using that day. Since I've had my holster a while, it's also great to have extra rubber spacers ready to go when it's time to replace old ones.
Alex D.
Lost a screw. You sent screw. Problem fix. Thank.
Stephen W.
I lost a screw because I did not Loctite before use, I emailed customer service and didn’t hear anything back so I messaged on Instagram and they got right back to me about what I needed to order. Afrer ordering it actually shipped much quicker than I was expecting. The pack had screws of all sizes so now I’m ready if I lose anything else. Great deal!
Brent B.
Like several other customers who posted here I failed to follow the directions and did not loctite my hardware after I set up my AGIS holster. The hardware packet had everything I needed to replace the missing hardware.
john r.
works great, fits great
Cade Lappin
Great service
Lost a screw out of the Axis Slim I bought for my Glock 30. Tier 1 was fantastic to communicate with and got me the hardware kit fast. Always a pleasure doing business with them.
Jerry T Nunley
Exactly as stated
Of course I didn't put the loctite on my retention screws. Then boom my Beltclip swings upside down and screw is MIA. Ordered this and received earlier than expected and now good as new with extra parts!
Chris
Fantastic
Very good to have extra hardware to use in case you need, especially with the claw interaction. The hardware included does not include the leather or bungie cord used in the AGIS or AXIS holsters however.